Stone Tile Cleaning & Restoration Maryhill

Progressively a Limestone floor will loose the initial appearance. This surface damage is caused by traffic scratches and etch marks The only way to revive the initial polish is through polishing the floor. We use industrial diamonds to eliminate the surface damage and rebuild the shine.

Nearly all Limestone tile surfaces are uneven due to the fact Limestone tiles are not installed flat. A Limestone floor should be smoothed by grinding off the lippage and irregular tile edges. You need specialized apparatus and years of experience to successfully grind a Limestone floor, but the final result is fantastic. The Limestone floor will get the appearance of appearing as a single slab of stone.

After grinding, the Limestone will sit at the same level the grout lines. Cleaning a ground and polished Limestone floor is much like cleaning an individual bit of glass. There will be no uneven grout lines to hold soil. Chips and cracks can be filled with colour matched resin repair fillers. We can advise the appropriate Limestone restoration process.

Find outabout our Limestone cleaning Maryhill work in addition to our substantial stone floor cleaning restoration options or Book your free Quote

Slate is an incredibly functional flooring that can be protected using a number of finishes including rough surface, smooth honed or polished finish. Slate floors need regular sealing to prevent spills and soil marking the surface.

There are specialist equipment and chemical treatments to get rid of the soil and old coatings, reviving the initial slate finish. After the professional cleaning is complete , we leave the floor to dry, then apply a durable, easy to clean sealer.

If you have the right slate, it may be ground smooth, rendering it better to clean.

Read more about our Slate cleaning and sealing Maryhill service and our entire stone cleaning  service or Book a Quote

Many Victorian and Edwardian hallways will have floors made of Geometric Encaustic tiles.

Victorian tiles are manufactured from natural clay with a normal non-shiny finish.

Because of their age, these floors have had lots of wear and can have layers of different sealers.

The key concerns with victorian floor tiles is to remove years of oils, polishes, dirt, waxes and grime whilst not harming the tiles.

A colour intensifying sealer is used following cleaning, to restore the original colours when you look at the tiles. If you prefer a sheen or gloss finish a surface sealer or wax could be used.

Learn moreabout our Victorian Minton Tiles cleaning and sealing Maryhill work as well as our substantial professional cleaningoptions or Book a Quote

Porcelain is actually a ceramic blend with additional sand and feldspar included to develop a denser tile.

High quality Porcelain has really low porosity, this means less stains, less water damage, and less need to be sealed.

There are inferior porcelains that may absorb soil and spills just like natural stone floors. If you've got an inferior Porcelain, the surface soil may be difficult to remove.

We are able to remove ingrained dirt using equipment made to get into the microscopic pits holding the soil.

After your porcelain floor has been cleaned we can to protect against regular soil and spills.

Solid color Porcelain may be ground and restored like Granite or Stone.

Find out about our Porcelain Tiles Cleaning Maryhill floor restoration service including our wide-ranging professional cleaning work or Book a Quote.

Natural tone floor tile cleaning is almost never just cleaning, there is certainly often extra restoration required. Restoring stone and tile usually involves a range of stages. Stone and tile floors suffer with foot traffic wear and damage, because people move over them. In most cases, soil, spillages and foot traffic marks affect the floor finish, consequently the need for stone restoration. Highly polished floors like Stone, Granite and Terrazzo show surface damage a lot faster as the polish goes dull from traffic scratching. Permeable stone and tile that is sealed using a coating sealer will progressively become affected by scratch deterioration.

Grout is normally the most sensitive section of a tile installation. Grout is usually slightly recessed, that means the grout traps more grime than the stone and tile itself. Cracks, chips and hole repairs are frequently part of the restoration work.

Grinding and honing takes out damage from etching and surface marks.Natural stone has got the appeal that a dirty, porous finish can be taken off, exposing a beautiful new surface.